Molecular Beam Mass Spectrometry System for Characterization of Thermal Plasma Chemical Vapor Deposition

A molecular beam mass spectrometry system for in situ measurement of the concentration of gas phase species including radicals impinging on a substrate during thermal plasma chemical vapor deposition (TPCVD) has been designed and constructed. Dynamically controlled substrate temperature was achieved using a variable thermal contact resistance method via a backside flow of an argon/helium mixture. A high quality molecular beam with beamtobackground signal greater than 20 was obtained under film growth conditions by sampling through a small nozzle (75 m) in the center of the substrate. Mass discrimination effects were accounted for in order to quantify the species measurements. We demonstrate that this system has a minimum detection limit of under 100 ppb. Quantitative measurements of hydrocarbon species (H, H₂, C, CH₃, CH₄, C₂H₂, C₂H₄) using Ar/H₂/CH₄ mixtures and silicon species (Si, SiH, SiH₂, SiCl, SiCl₂, Cl, HCl) using Ar/H₂/SiCl₄ mixtures were obtained under thermal plasma chemical vapor deposition conditions.     

Polystyrene/thermoplastic starch blends with different plasticizers

Conventional plastics has a large impact in increasing the environment’s pollution. That’s why the interest has turned towards novel partially and completely biodegradable polymers. In this work, blends of polystyrene and thermoplastic starch with glycerol and Buriti (Mauritia flexuosa L.) oil as plasticizers were prepared. Samples were analyzed using TG/DTG and DSC techniques. The TG results indicated that the blends with Buriti oil are thermally more stable than those with glycerol. The DSC analysis that Buriti oil provides a higher degree of plasticization of PS, compared to the blends plasticized using glycerol under the studied conditions.     

Synthesis and structural characterization of a fully conjugated macrocyclic tetraaza(14)-membered Schiff base and its bivalent metal complexes

A novel 14-membered macrocyclic Schiff base derived from 3-cinnamalideneacetoacetanilide and o-phenylenediamine acts as a tetradentate and strongly conjugated ligand to form a cationic solid complex with CuCl₂/NiCl₂/CoCl₂/ZnCl₂. The ligand and the complexes were characterized by the usual spectral and analytical techniques. The main i.r. band of the macrocyclic Schiff base was compared to that of its metal complexes. The C=N bands are shifted to the lower wave number. The cyclic voltammogram of the copper complex shows that the macrocyclic ligand is able to stabilize the copper(III) oxidation state. The e.s.r. spectra of the copper complex in DMSO solution at room temperature and liquid N₂ temperature were recorded and their salient features thoroughly discussed. The antimicrobial screening tests were also recorded and gave good results in the presence of metal ions in the ligand system.     

新型亲核NO供体Diazeniumdiolate及其靶向性控释材料

新型亲核NO供体diazeniumdiolate独特的化学结构和性质,使其成为目前NO供体研究的一个热点.要使其成为更有效的药物,它的靶向性和控释性能是当前研究的重点,减小亲核试剂(多胺)的细胞毒性和亚硝胺的生成是研究的难点.本文对增强靶向性释放所采取的三个措施(聚合物控释、特定酶代谢释放和光降解释放)的近十几年国外的研究情况进行了综述.     

On the mechanism of electroluminescence emission by porous silicon layers

The analytical treatment of a model considering the electrooxidation of p-porous silicon layers under galvanostatic conditions is able to give account of experimental facts such as the shape and location of the electroluminescence peak as well as of the spectral shift of the electroluminescence peak produced by oxidation. The proposed model considers electroluminescence to be the result of electron injection into the conduction band by an adsorbed intermediate produced by electrooxidation of the surface coverage with hydrogen or siloxene of the silicon nanocrystallites. The access of holes to the surface is made possible by low accumulation layer conditions and is the rate determining step in the electroluminescence mechanism. In this way it is possible to give a satisfactory explanation to the shift towards the blue experimented by the electroluminiscence emission maximum as a consequence of electrooxidation.     

Poly[3-(3,4-dihydroxyphenyl)glyceric acid] from Stems of <Emphasis Type="Italic">Symphytum asperum</Emphasis> and <Emphasis Type="Italic">S. caucasicum</Emphasis>

Two high-molecular-weight (>1000 kDa) water-soluble preparations were isolated from stems of Symphytum asperum and S. caucasicum. Their basic component was established as poly[hydroxy-1-carboxy-2-(3,4-dihydroxyphenyl)ethylene], analogous to that of high-molecular-weight (>1000 kDa) preparations from roots of these same plants, using IR and NMR spectral data. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 303–305, July–August, 2005. An erratum to this article is available at .     

一种非晶硅膜改性弹性玻璃毛细管交联中等极性固定相色谱柱的制备

研究了非晶硅膜改性的弹性玻璃毛细管交联ＯＶ－１７０１中等极性固定相色谱柱。在适当温度下，采用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联ＯＶ－１７０１固定液，成功地制备了交联ＯＶ－１７０１柱，该柱具有柱效高、惰性好、耐溶剂、抗腐蚀和耐高温等性能，是一种新型高性能的中等极性交联柱。     

Gel routes to environmental catalysts

Various methods for the preparation of metal oxide catalysts for environmental control purposes are described. These include coprecipitation, sol-gel, and impregnation, and are used to prepare mixed oxide catalysts of the types SnO₂-MO₂ (M=Ce or Zr), SnO₂-Ln₂O₃ (Ln = lanthanide), Ln-doped CeO₂, Cr (VI)-doped SnO₂, and Cu(II)-doped SnO₂. The aggregation in stable colloidal sols of SnO₂, CeO₂ and ZrO₂ is dependent on the concentration of the metal oxide. Techniques for the characterisation of these catalyst materials include gas adsorption, X-ray diffraction, and TEM/EDXA.     

An overview of laboratory performance studies conducted by the IAEA for marine pollution studies of metals and organic contaminants

Aspects of the International Atomic Energy Agency (IAEA) Analytical Quality Control Services (AQCS) for marine environmental studies are discussed, focusing on recent laboratory performance studies (LPS) and the production of reference materials for trace metals and organic compounds in various marine matrices. The IAEA has organized seventeen global interlaboratory studies for a range of organic contaminants. Of note has been the inclusion of numerous polychlorinated biphenyl congeners (PCBs) and some sterols of anthropogenic origin. Concurrently, there have been eleven worldwide intercomparison exercises for trace metals in the marine environment, most of which included methylmercury. Although such interlaboratory studies can help improve performance in individual laboratories and regional laboratory networks, the results reveal that problems remain in the determination of some metals and many organic contaminants.